Hygger [ HG956 ]

Hygger Hand-Operated Pumps for Aquariums Aquarium Water Changer

$24.99
  • 3-in-1 Water changing, sand washing and dirt absorption
  • Easy to assemble and use
  • Ultra-quiet and powerful
  • Suitable for small and large aquariums
  • Air-pressing button
  • Water hose controller clamp
  • Adjustable handle and extensable tube design
payments

Hygger Hand-Operated Pumps for Aquariums Aquarium Water Changer

$24.99

3 Functions In One

It is a multifunctional gravel cleaner which integrated 3 excellent functions: dirt suction, sand washing, and water changing.

Dirt Suction: This aquarium gravel vacuum cleaner is equipped with a duckbill suction inlet which can be used to suck the hidden feces away easily.

Sand Washing: The sand washer has 2 thickened airbags inside, which can pump water quickly.

Products info
Products info

3D Filter Basket Net

The aquarium siphon comes with a 3D filter basket net which can protect your love fish and small gravel from being sucked out of the aquarium.

Suitable for Various Sizes of Aquariums

The vacuum gravel cleaner comes with spliced extension tubes. With two-stage splicing combinations, it fits for both large and small tanks. Four basic combinations are listed below for reference.

For large fish tanks, please connect 2 pipes: 2 tubes (31.4 inches long); 2 tubes + head accessory (34 inches long).

For small fish tanks, please connect 1 pipe: 1 tube (16 inches long); 1 tube + head accessories (18 inches long).

This vacuum cleaner has enough power to quickly drain dirty water, and clean every corner of the tank without getting hands wet.

Products info
Products info

Easy to Assemble and Use

Step 1: Connect the water inlet and outlet.

Step 2: Put the extension tube into aquarium and the water outlet into a bucket.

Step 3: Push the siphon switch of the cleaner several times until the water fills with the whole outlet strap tube.

Step 4: Release the siphon switch, then water will flow out automatically. If not, continue to operate until the water flows out quickly and automatically.

Step 5: Allow the sand to move up and down in the extension tube to remove debris from your aquarium.


 Warm Tips for Using the Aquarium Gravel Cleaner

1. The principle of this sand cleaner is gravity. The water outlet must be at least 19 inches lower than the water inlet when you use this gravel cleaner.

2. Due to manual measurement and length conversion, 1/10’’ to 1/2’’ error is allowed. Please in kind prevail.

3. Due to different strengths of different person, and the size and water depth of the fish tank, there is no clear drain flow rate. Please refer to the actual operation.

4. When washing sand: If the filter from your fish tank is powerful, you can put the outlet hose into the fish tank, and the sand is circulated in the tank without draining water. If not, it is recommended to remove turbid water directly from the tank and change clean water.

5. When too much gravel is sucked in and is about to reach or reach the top of the tube (near the filter port), lift the hard tube slightly and the gravel will fall back into the fish tank.

6. Do not use the gravel cleaner in flammable and corrosive liquid.

7. To avoid material damage, do not use the water changer in too hot (above 36°C / 86°F) or too cold (under 0°C / 32°F) water.

 Product Parameters

Model Material Outlet Strap Hose PVC Water Hose Outer Diameter PVC Water Hose Inner Diameter Extension Tube Diameter
HG-956 PP+ABS 79 inches long 0.7 inch 0.55 inch 1-1/8 inch

 Packing List

  • Air-pressing Control Body x1
  • Extension Inlet Tube x2
  • Extension Tube Connector x1
  • User Manual x1
  • Duckbill Suction Inlet (Debris Vacuum) x1
  • Outlet Hose (79-inch PVC Hose) x1
  • Water Flow Clamp (Flow Control Valve) x1
  • Fixture Clamp (Water Pipe Clamp) x1